24
IQ System Controller 3/3G Quick Install Guide
Up to two IQ Load Controllers, each enabling ne-grained, circuit-
level control for 2x 240 V or 4x 120 V essential load circuits can
be integrated with IQ System Controller. Each 240 V load can be
controlled independently, but the 120 V loads can be controlled in
groups of up to two loads. Sunlight Backup system needs at least
one IQ Load Controller to be installed on the site.
For detailed wiring instructions, refer to the IQ Load Controller QIG.
Aux wiring: IQ Load Controller
Section C - Wiring
NOTE: Control lines to headers support 28 AWG and 16 AWG wire gauges.
To Next Page
Loading...
