10
TIG Brush™ Instruction Manual
2022
S2
Protect yourself and others by observing all safety
information, warnings and cautions. Failure to comply with
instructions could result in personal injury and/or damage
to the product or property.
Read this documentation carefully before operating the
equipment. Please retain these instructions for future
reference.
Before using the TIG Brush, make sure the work environment
is well ventilated and away from any combustible substances.
Ensure that all required equipment is available.
Do not use the TIG Brush for any purpose other than that
described in this manual. Failure to observe this warning
may result in permanent damage to the TIG Brush, cause
damage to the workpiece, cause injury to the operator
and void the warranty.
The TIG Brush is one of the safest appliances in its class. However
some precautions must be taken with the use of the TIG Brush,
as with any electrolytic/electrochemical weld cleaner.
• The TIG Brush uses mild acids; gloves should be used to
avoid prolonged contact with any of the fluids.
• Goggles or safety glasses should be worn to prevent fluid
being splashed in the eyes.
Where an inhalation risk exists, wear a type B (Inorganic
gases & vapours) respirator.
SAFETY PRECAUTIONS
SAFETY INFORMATION
WARNING
•
SAFETY PRECAUTIONS AND INFORMATION
To Next Page
Loading...