Ensitech TIG Brush - Table of Contents

8
TIG Brush™ Instruction Manual
2022
9
10
12
12
13
14
16
16
16
17
18
19
21
16
22
22
22
23
24
24
24
24
24
24
24
24
24
26
26
26
INTRODUCTION
SAFETY PRECAUTIONS AND INFORMATION
DESCRIPTION OF BASIC EQUIPMENT
S1
S2
S3
3.1 Classic Kit
3.2 Flexi Handle Kit
3.3 PROPEL Kit
4.1 Preparation
4.2 Assembly
4.2.1 Classic Kit
4.2.2 Flexi Handle Kit
4.2.3 PROPEL Torch
4.3 Cleaning Fluid
4.4 Operation
OPERATIONS4
POWER AND MODE SETTING
5.1
5.2
S5
Power Settings
Mode Settings
MAINTENANCES6
28
WARRANTYS9
CONSUMABLES
7.1
7.2
7.3
S7
Brushes
Insulating Shrouds
257.4
PROPEL Torch Collets
Fluids
• Pre-Weld Cleaning Fluids
• Weld Cleaning Fluids
• Neutralising Fluids
• Finishing Fluid
• Printing Fluids
• Engraving Fluids
TROUBLESHOOTING
8.1 The mains power button on the back of the Control Unit doesn’t
operate properly or illuminate.
The front panel LEDs are not illuminating.
8.2
26
The Control Unit is making a humming/buzzing noise.
8.3
27
The front Control Unit lights are illuminated but it will not clean or
it’s not performing as well as normal.
8.4
S8
CONTENTS