Enterasys C2RPS-SYS User Manual

SecureStack C2
Redundant Power System
C2RPS-SYS
Installation Guide
C2RPS-CHAS8
C2RPS-PSM
Power
9033977-01
Caution: Do not use this product with SecureStack C2 PoE devices. Any SecureStack
C2 device with a “P” suffix in the model number (C2xxxx-xxP) indicates a SecureStack
C2 PoE-compliant device and is not compatible with this power system.
Precaución: El RPS no es compatible con switches SecureStack C2 con PoE. No
intente conectar el cable de corriente del RPS a ningún switch SecureStack C2 que
tenga el sufijo “P” en el nombre del modelo, tal como C2xxxxx-xxP. De lo contrario, el
dispositivo puede dañarse.

Enterasys C2RPS-SYS Specifications

General

Brand	Enterasys
Model	C2RPS-SYS
Category	Power Supply
Language	English

Summary

Chapter 2: Installation

Unpacking Chassis and Power Supply Module(s)

Installing C2RPS-PSMs

Step-by-step guide for installing Power Supply Modules (PSMs) into the chassis.

Replacing an Installed C2RPS-PSM

Procedure for safely removing and replacing an existing PSM in an operating system.

Installing C2RPS-CHAS8 into the Rack

Instructions for mounting the C2RPS-CHAS8 chassis into a standard 19-inch rack.

Rack Mounting the Chassis

Specific steps for physically securing the chassis to the rack frame.

Connecting the PSM Cables and AC Power Cords

Procedure for connecting PSM cables and AC power cords for system operation.

Appendix A: Specifications

C2RPS-CHAS8 Chassis Specifications

Detailed physical and electrical specifications for the C2RPS-CHAS8 chassis.

C2RPS-PSM Specifications

C2RPS-PSM Redundant Power Supply Output Connector