Enthermics DC250 - Page 26

24
MN-37072 • Rev 2 • 05/16 • Designer Series Blanket Warmer
Dimension Drawings
DC400 with standard feet
Dimensions
(H x W x D)
With feet (standard): 21.9" x 24.0" x 28.0" (557mm x 610mm x 712mm)
With plate and
casters
(optional):
26.1" x 24.0" x 28.0" (664mm x 610mm x 712mm)
With bumper and
casters (optional):
26.2" x 26.8" x 28.9" (665mm x 679mm x 734mm)
Capacity
4.0 
3
Weight**
(est.)
Net: 85-1/2 lbs (439 kg) Ship: 160 lbs (73 kg)
Electrical
*Other international plugs are available, contact factory for more information.
**Domestic ground shipping information. Contact factory for export weight and dimensions.
120 V.A.C. — 60 Hz, 1 ph
0.8 kW, 6.7 Amps
Safety Class I Equipment
No Applied Parts
Mode of Operation: Continuous
NEMA 5-15P
15A - 125V Plug
Hospital Grade
IPX-0
E471516
220 V.A.C. — 50Hz, 1 ph
0.8 kW, 3.6 Amps
Type B Equipment
CEE 7/7*
220-230V Plug
IPX-0
230 V.A.C. — 50 Hz, 1 ph
0.8 kW, 3.5 Amps
Type B Equipment
BS 1363 Plug*
(UK only)
CEE 7/7*
220-230V Plug
IPX-0
**Domestic ground shipping information. Contact factory for export weight and dimensions.
24.3" (618mm)
18.5
" (470mm)
IEC Cord Inlet
28.0" (712mm)
12 " (305mm)
IEC Cord Inlet
23.5" (597mm)
50.0" (1270mm)
47.0" (1194mm)
21.1" (537mm) 21.9" (557mm)
21.0" (533mm)
CAVITY
20" (507mm)
INSERT
24.0" (610mm)
21" (533mm)
CAVITY
25.1" (638mm)
14.6" (372mm)
INSERT
15.1" (384mm)
CAVITY
Cord length: 6 ft (1.83m) (est.)
Clearance requirements:
3" (76mm) from rear
1" (25mm) from top and sides
3/4" (19mm) from bottom