OPERATION
Combin ation Blan ket/Flui d W armer ▪ Operat or’ s Manua l ▪ MN -399 40 ▪ Rev 3 ▪ 8/20
27
OPERATION
Preparing the Warmer for First Use
Before you begin
Approved cleaning
agents
▪ 70% or greater isopropyl alcohol
▪ PDI Sani-Cloth® HB
Procedure To prepare the warmer for first use, do the following.
Step Action
1. Make sure that the warmer is turned off and cool.
2. Wipe the outside of the warmer:
▪ with a stainless steel cleaner, if stainless steel panels.
▪ with an approved cleaning agent, if painted panels.
3. Clean the interior of the warmer with a damp cloth or approved cleaning
agent.
4. Dry the interior and exterior of the warmer with a clean, lint-free cloth.
Leave the door open until the interior of the warmer completely dries.
5. Clean each side of the window pane with glass cleaner or distilled vinegar.
Result The warmer is now ready for use.
CAUTION: Burn hazard.
Allow the warmer to cool before cleaning.
NOTICE
Do not use:
▪ abrasive cleaning compounds.
▪ chloride based cleaners.
▪ commercial or household cleaners containing ammonia.
To Next Page
Loading...
