Enthermics EC1850BL - How to Turn on and Turn off the Warmer

OPERATION
Combinat ion Blan ke t/F luid W a rmer ▪ Operato r’s Man ual ▪ M N-399 40 ▪ Rev 3 ▪ 8/ 20
28
How to Turn On and Turn Off the Warmer
Before you begin The warmer must be connected to electric power.
Turning on the
warmer
To turn on the warmer, do the following.
Step Action
1. Set the power switch a to the ON (l) position.
2. Press the standby button . The screen turns on.
The blanket warmer and TriMode warmer screens must be turned ON
separately.
The warmer is now on.
Continued on next page

NOTE: A temporary odor may be noticeable upon initial
start-up of the warmer. Contact the manufacturer if the
odor persists after a day or more of continuous use.
EC1850BLEC1350BL
EC-TS-004628
a
a