TROUBLESHOOTING
Combin ation Blan ket/Flui d W armer ▪ Operat or’ s Manua l ▪ MN -399 40 ▪ Rev 3 ▪ 8/20
51
How to Replace a Fuse (EC1850BL only)
Procedure To replace a fuse, do the following.
Step Action
1. Press and hold the standby button until the screen turns off.
2. Set the power switch a to the OFF (0) position.
Continued on next page
WARNING: Fire and electrical shock hazard.
Use only UL listed 20A, 250V fast acting fuses, 6.3mm x 32mm
(F1, F2). Access should be made by qualified service technicians
only.
To Next Page
Loading...
