MAINTENANCE
Combin ation Blan ket/Flui d W armer ▪ Operat or’ s Manua l ▪ MN -399 40 ▪ Rev 3 ▪ 8/20
41
How to Clean the Warmer
Before you begin
Approved cleaning
agents
▪ 70% or greater isopropyl alcohol
▪ PDI Sani-Cloth® HB
Monthly cleaning
procedure
To clean the warmer monthly, do the following.
Step Action
1. Make sure that the warmer is disconnected from electric power and cool.
2. Wipe the outside of the warmer with a stainless steel cleaner.
3. Vacuum lint from fan openings, fan sail switch, and vent openings.
4. Clean the interior of the warmer with a damp cloth or approved cleaning
agent.
5. Dry the interior and exterior of the warmer with a clean, lint-free cloth.
Leave the door open until the interior of the warmer completely dries.
6. Clean each side of the window pane with glass cleaner or distilled vinegar.
Continued on next page
WARNING: Electric shock hazard.
Disconnect the warmer from electric power before cleaning.
WARNING: Crushing hazard.
An unstable warmer can lead to a crushing hazard. Observe
your facility’s best practices for moving large equipment.
CAUTION: Burn hazard.
Allow the warmer to cool before cleaning.
NOTICE
Do not use:
▪ abrasive cleaning compounds.
▪ chloride based cleaners.
▪ commercial or household cleaners containing ammonia.
To Next Page
Loading...
