SAFETY
Combin ation Blan ket/Flui d W armer ▪ Operat or’ s Manua l ▪ MN -399 40 ▪ Rev 3 ▪ 8/20
9
Operator
qualifications
Only trained personnel with the following operator qualifications are permitted
to use the warmer:
▪ Have received proper instruction on how to use the warmer.
▪ Are familiar with the purpose, limitations, and associated hazards of the warmer.
The warmer must not be used by:
▪ People impaired by drugs or alcohol.
Condition of warmer Only use the warmer when:
▪ All controls operate correctly.
▪ The warmer is installed correctly.
▪ The warmer is clean.
▪ The warmer labels are legible.
Servicing the warmer ▪ Obey precautions in the manual, on tags, and on labels attached to or shipped
with the warmer.
▪ Only trained personnel are permitted to service or repair the warmer. Repairs
that are not performed by a trained technician, or the use of non-factory parts,
will void the warranty and relieve all liability.
▪ Any troubleshooting guides and components views included with this manual
are for reference only and are intended for use by qualified and trained service
technicians.
▪ To prevent serious injury, death or property damage, have the warmer inspected
and serviced at least every twelve (12) months by a trained technician.
▪ Contact Enthermics for the authorized service partner in your area.
Incident notice ▪ Any serious incident that has occurred in relation to the warmer should be
reported to the manufacturer and the competent authority of the Member State
in which the user and/or patient is established.
To Next Page
Loading...
