EasyManua.ls Logo

Envicool XRow Series - Shut down Via Remote Control; Maintenance; Circuit Board; Air Filter

Default Icon
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Shenzhen Envicool Technology Co., Ltd.
62
6.1.5 Shut down via remote control
Users can switch on and off remotely through the touch screen switch key, remote power on / off dry
contact, or through the communication port RS232 / 485.
6.2 Maintenance
6.2.1 Circuit board
The circuit board should be checked once a year, to see if the cable connection is loose and if the
cable is aging.
6.2.2 Air filter
The air filter is always an easily overlooked component in the system. In order to ensure the
effective operation of the equipment, the filter should be tested once a month and cleaned and
replaced immediately when needed.
Warning
Before replacing the unit air filter, please ensure that the unit fan is stopped, otherwise it may
cause injury accidents.
The air filter of the indoor unit is installed at the return air vent. Open the rear door panel,
loosen the platen assembly and rotate it 90 degrees, and then the filter can be taken out directly.
As shown in Figure 6-1.

Table of Contents

Related product manuals