ENVIRO-TEC
10
The air vent provided on the unit is not intended to replace the main system air vents and may
not release air trapped in other parts of the system. Inspect the entire system for potential air
traps and vent those areas as required, independently. In addition, some systems may require
repeated venting over a period of time to properly eliminate air from the system
Motor & Fan Data
AHRI Standard Ratings
NOTES:
1. Based on 80°F DB and 67°F WB EAT, 45°F EWT, 10°F temperature rise, high fan speed. Motor type is PSC and motor voltage is
115/1/60. Airow under dry coil conditions. All models tested at 0.05” external static pressure.
2. Airow rate CFM on sizes 14 through 20 exceed maximum ratings in AHRI 440 and are therefore not certied.
(BTUH) (BTUH) ft-w g (WATTS)
FNF / FNP 06
•410 700 17800 14000 3.71.6 290
FNF / FNP 08
•410 900 23500 18500 4.91.9 410
FNF / FNP 10
•410 110029400 22900 6.02.2 470
FNF / FNP 12
•410 140043000 31800 8.74.2 560
FNF / FNP 14
410 175047100 36250 9.63.0 715
FNF / FNP 16
410 200051000 41000 10.52.0 830
FNF / FNP 18
410 220053000 42000 11.02.2 850
FNF / FNP 20
410 230056000 44000 11.42.5 870
CFM
(Dry Flow)
MODEL /
SIZE
Rows FPI
AHRI 440
CERTIFIED
HPF/HPP
HPF/HPP
HPF/HPP
HPF/HPP
HPF/HPP
HPF/HPP
HPF/HPP
HPF/HPP
NOTES:
1. Motor electrical data is nameplate data. Actual data will vary with application.
2. Motors nameplated for 208-230/1/60. Data is at 230 volts.
3. ECM motors operated on 208/1/60 power result in reduced airow.
Medium (1) 1/8 2.1 0.9 0.8
Medium (1) 1/6 3.3 1.0 0.8
Meduim (1) 1/5 4.1 1.5 1.2
Medium (2) 1/8 4.2 1.8 1.6
Medium (2) 1/6 6.6 2.0 1.6
Medium (2) 1/5 8.2 3.0 2.4
Medium (2) 1/5 8.2 3.0 2.4
High (2) 1/4 9.8 4.4 3.8
Medium (2) 1/5 8.2 3.0
2.4
Low (2) 1/6 6.4 2.2 1.6