Operations Manual
3. CHARGING
Envirotainer RKN e1 Container
3.1 CHARGING PROCEDURE
The recommended procedure is:
1. Open the cover of the charging unit (Fig. 1 ).
2. Pull out the cable from the charging unit (Fig. 3 ).
IMPORTANT
Pull out all of the cable.
3. The container can be charged either by connecting the blue CEE industry plug to a
suitable socket or by using one of the adapters.
Follow step 4-5 if an adapter is to be used. Otherwise continue from step 6.
Fig. 2
4. Pick the appropriate type of adapter (Fig. 2 ) from the adapter case. There are also
additional adapters that can be ordered separately from Envirotainer.
Refer to chapter 3.2 Additional Charging Adapters.
(PROCEED ON NEXT PAGE!)
Doc No. MO-RKN-3009
Version 2.2: 2017-08-31 6 (42)
To Next Page
Loading...