What to do if Envitec Medical Equipment shows a Hardware XXXX error?
If your Envitec Medical Equipment displays a Hardware XXXX error, first, switch the unit off and then on again. If the fault persists after restarting, it indicates an internal hardware fault, and you should contact customer service for further assistance.
How to fix rechargeable battery issues with Envitec Medical Equipment?
To resolve rechargeable battery issues with your Envitec Medical Equipment: * Check the battery charge level. * Ensure the battery is properly connected. * If the battery charge is too low, charge it. * If necessary, replace the battery if it is faulty.
What to do if Envitec Medical Equipment displays a memory error?
If your Envitec Medical Equipment displays a memory error, indicated by a missing “Data memory” menu item, try switching the unit off and then on again. If the fault persists after restarting, it indicates an internal memory error, and you should contact customer service.
Why does my Envitec Medical Equipment need settings changed?
Your Envitec Medical Equipment might require settings adjustments (like language) if the battery was removed for an extended period or due to an internal memory error. Check the settings and change them if necessary. If the problem continues, it indicates an internal memory error, and you should contact customer service.
General| Brand | Envitec |
|---|---|
| Model | MySign s |
| Category | Medical Equipment |
| Language | English |
Instructions for setting up the unit, sensor, or adapter cables.
Lists warnings for operating the MySign® S unit in various environments and conditions.
Defines the intended use of the MySign® S for monitoring SpO2 and pulse rate.
Explains the two core principles behind non-invasive pulse oximetry technology.
Advises performing a functional test before initial use.
Describes how to connect the SpO2 sensor to the MySign® S unit.
Details methods for charging the device's battery via external power or USB.
Explains how to set up or mount the MySign® S unit using its support or an optional holder.
Details the information displayed on the screen, including measurements, status, and indicators.
Provides step-by-step instructions for powering the device on and off.
Details how to set upper and lower limits for SpO2 and pulse rate alarms.
Details the procedure for cleaning and disinfecting the main unit using isopropyl alcohol.
Step-by-step guide on how to replace the unit's rechargeable battery.
Outlines the procedure for removing and replacing the SpO2 sensor.
Lists visual and audio signals associated with different alarm conditions and their priorities.
Lists key technical details like display area, precision, operating conditions, and dimensions.
Presents clinical evaluation results for SpO2 sensor accuracy based on ISO standards.
To Next Page
