Envitec MySign s - Measured Value Display

Pulse oximeter MySign
®
S
6.5.1 Measured value
In this display mode, the currently measured SpO2 and pulse values as well as the pulsation index and signal
quality are displayed. To view an overview of the measurements that have already been performed, go to
“Measurement series” in the “Data memory” menu.
Select “Measured value” from the “View” menu.
Horizontal position
Î
Measurement value view
When holding the unit horizontally, the measurement value will also be displayed horizontally.
066-07-1002197_GA_MySignS_FDA / 06.14 25