Pulse oximeter MySign
®
S
4 Commissioning
4.1 Unpacking and testing the delivery
If the shipping box is damaged, notify your shipper. Unpack the MySign
®
S and its accessories. If a part is missing
or damaged, contact the customer service of EnviteC or your local EnviteC dealer.
4.2 Parts list
1 x pulse oximeter MySign
®
S
1 x operating manual unit
1 x CD technical documentation unit
1 x USB cable
4.3 Function test
Verify the proper functioning of the MySign
®
S before using it the first time. Do this by following the further
instructions in section 6.1.
4.4 Installation
Connect the SpO2 sensor to the MySign
®
S unit as shown below.
Note the arrow on the sensor plug and the unit socket to ensure the correct connection orientation.
Otherwise the contacts could be damaged and correct functioning cannot be guaranteed!
To Next Page
Loading...
