Envitec MySign s - Page 52

Pulse oximeter MySign
®
S
SpO2 sensors with adapter cable Part number
Extension and adapter cables
X-4211-3 MySign
®
FDA
1002208
Extension and adapter cables
X-4211-1 MySign
®
FDA
1002209
SoftTip
®
Large R-3212-9 MySign
®
FDA 1002210
SoftTip
®
Medium RM-3212-9 MySign
®
FDA 1002211
SoftTip
®
Small RS-3212-9 MySign
®
FDA 1002212
Ear sensor ES-3212-9 MySign
®
FDA 1002213
FingerClip F-3212-9 MySign
®
FDA 1002214
Disposable sensor DA-2211-1 MySign
®
FDA 1002215
Disposable sensor DP-2211-2 MySign
®
FDA 1002216
1)
The power supply (Part No. 1001829) is not included and must be ordered separately if needed.
The SpO2 sensors (previous page) and SpO2 sensors with adapter cable listed above have been
tested
to comply with applicable emissions and immunity requirements. Representative sensors of
each type were tested with the maximum cable length of 390 cm, which includes the X-4211-3
Extension and Adapter Cable maximum length of 300 cm plus the connected SpO2 sensor maximum
length of 90 cm.
The use of accessories, transducers and cables other than those specified could result in increased
EMC emissions or decreased EMC immunity.
52 066-07-1002197_GA_MySignS_FDA / 06.14