20 / 48
File names
The file names that are used for the communication between general
practice IT systems and PhysioQuant software should be entered in the
'File names' field.
File names consists of a device identification code (1 - 4 characters),
e.g. PHYQ, and a EDP identification code (1 - 4 characters) for the
general practice IT systems, e.g. EDP1.
Both these identification codes are then used to create file names, which
will always have the extension *.GDT.
Directory for communication data files
The data transfer folder can be created where you want. In order to avoid
any networks errors, a separate folder should be created for each
individual work station (e.g. on a local PC).
NB: GDT data files will need to be read and then
deleted by the general practice IT system, before
any further GDT data files can be generated.
Data transfer
Prior selection will determine which data is transferred to general practice
IT system.
Example Short summary (one line)
LZBDM: Day 108/ 67/ 78 - Night 0/ 0/ 78 = -100/-100/-100 %
Example Table
24 h BPM Day phase Night phase Difference
06:00-21:59 22:00-05:59 Day/Night phase
Mean values:
Ps[mmHg 108 0 -100%
Pd[mmHg 67 0 -100%
HR[P/min 78 0 -100%
To Next Page
Loading...
