23 / 48
4.3 LCD display with all symbols and display options
• Flashes for every detected oscillation
• Displayed constantly when measurement data has
been stored
• Flashes when batteries are running out
• Continuous display when batteries are empty and no
measurements can be made
• Day phase has been selected
• Night phase has been selected
4.4 Power supply
The PhysioQuant Recorder requires either two nickel metal hydride
rechargeable batteries, or two alkaline batteries.
When starting the recorder via the PhysioQuantWin software, please
ensure that the relevant power source has been selected (see 6.6
Programming the recorder, page 30)
In addition, the device also has a built-in lithium cell to indicate the time.
The capacity of two fully-charged rechargeable batteries or two new
batteries ensures at least 30 hours of operation or 200 measurements.
M
To Next Page
Loading...
