25 / 48
4.6 Function control
The PhysioQuant recorder will automatically carry out a self-test when it
is switched on, which will activate all symbols and segments of the LCD
display.
The device will then check the inserted (rechargeable) batteries and will
display the available capacity.
In this context, e.g. 'C100' refers to a 100% (rechargeable) battery
capacity (fully charged) and 'C50' refers to a 50% (rechargeable) battery
capacity (half empty).
In order to carry out a 24 hour measurement, the capacity needs to be at
least 90%.
If the capacity is below 90%, then you will need to insert new batteries or
fully-charged rechargeable batteries.
When the self-test has been completed successfully, the following
information will appear on the display after the power supply test:
• The actual time
• The measurement phase (day/night)
• Whether any measurement data has been stored
To Next Page
Loading...
