6 / 48
7 IMPORTING RECORDER DATA AFTER MEASUREMENTS 37
7.1 Connecting the recorder 37
7.2 Starting the programme 37
8 ANALYSIS OF MEASUREMENT RESULTS 38
8.1 Starting the programme 38
8.2 Find/delete measurement results 38
8.3 Representation 39
8.4 Overview 40
8.5 Single-value graph 40
8.6 Single-value table 40
8.7 Hourly mean values graph and table 40
8.8 Findings report 40
8.9 Printing 41
8.10 GDT export to general practice IT systems 41
9 ERROR CODES 42
10 SCOPE OF DELIVERY 43
11 ACCESSORIES AND SPARE PARTS 43
12 CLEANING AND MAINTENANCE 44
12.1 Cleaning and disinfection of device surface 44
12.2 Cleaning and disinfection of cuffs 44
12.3 Cleaning of tubes 45
12.4 Maintenance and validity check prior to any use 45
12.5 Calibration mode 46
12.6 Disposing of the device 46
13 TECHNICAL INFORMATION 47
To Next Page
Loading...
