3
terminals' sparkle may ignite the hydrogen released by the battery.
The AC output port is only connected to the load. Therefore, it is strictly forbidden
to connect other power sources or utilities. Otherwise, the damage will be caused
to the inverter/charger. Also, turn off the inverter/charger before any installation.
It is strictly forbidden to connect a transformer or a load with a surge power (VA)
exceeding the overload power at the AC output port. Otherwise, the damage will
be caused to the inverter/charger.
Both utility input and AC output are of high voltage, do not touch the wiring
connection to avoid electric shock.
7. Safety cautions for inverter/charger operation:
When the inverter/charger is working, it will generate a lot of heat; the cover
temperature would be very high. Please do not touch it.
When the inverter/charger is working, please do not open the inverter/charger
cabinet to operate.
When eliminating the faults or disconnecting the DC input, turning off the
inverter/charger's switch, then carry out the operation after the LCD screen is
completely OFF.
8. The dangerous operations which would cause electric arc, fire, or explosion:
Touch the wire end that hasn't been insulation treated and maybe electriferous.
Touch the wiring copper row or internal devices that may be electriferous.
The power cable connection is loose.
Screw or other spare parts inadvertently falls into the inverter/charger.
Incorrect operations are carried by untrained non-professional, or technical personnel.
Once an accident occurs, it must be handled by professional and technical personnel.
Improper operations would cause more serious accidents.
9. Safety cautions for stopping the inverter/charger
Firstly turn off the breakers on the utility input side and AC output side, then turn off the DC switch;
After the inverter/charger stops for ten minutes, the internal conductive devices could be touched;
The inverter/charger can be restarted after removing the faults which may affect its safety
performance;
No maintenance parts in the inverter/charger. If any maintenance service is required, please contact
our after-sales service personnel.
To Next Page
Loading...
