4. Carefully remove the paper from the paper path with both hands.
Note:
If the paper is difficult to pull out because only a small portion of the paper is visible, see “Paper
jam — output cover” on page 100.
5. Reinstall the developer cartridge.
6. Close the printer’s front cover.
Printing automatically restarts from the page that jammed. If the Error light continues flashing
after removing all jammed paper, open and close the printer’s front cover again to clear the error.
Paper jam — output cover
If the jammed paper inside the printer is difficult to remove because only a small portion of the
paper is visible, remove the sheet as follows:
Note:
The illustrations used in this procedure show the EPL-6200.
1. Make sure that the output tray is raised.
EPSON AcuLaser M1200 Series User’s Guide
Troubleshooting 100
To Next Page
Loading...
