Epson Aculaser M1200 series - Status Alert Window

5
Do not display this
window automatically
check box
When this check box is selected, the Order Online window appears
automatically only when a replacement part first becomes low or reaches
end of service life.
More Settings (AcuLaser M1200/EPL-6200L)
You can monitor over routers or use the SMB protocol for communication to monitor Windows
shared printers.
1 Use SMB for communication You can monitor using both Winsock1.1 and SMB if you select the Use
SMB for communication check box. If you do not select it, you can
monitor only using Winsock1.1.
2 Monitor over routers You can monitor Windows shared printers over routers.
Status Alert window
The Status Alert window appears automatically when an error occurs. It indicates what type of
error has occurred and offers you a possible solution. It closes automatically once the problem is
cleared.
The Status Alert window opens when an error has occurred. The window does not open when the
error is set to do not notify in the Monitoring Preferences dialog box.
AcuLaser M1200/EPL-6200L
EPSON AcuLaser M1200 Series User’s Guide
Using the Printer Driver For Windows 42