Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the following conditions:
❏ Use of multiple laser printers in a confined area
❏ Operation in conditions of extremely low humidity
❏ Poor room ventilation
❏ Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat generated are:
❏ Not blown directly into the user’s face
❏ Vented directly out of the building whenever possible
Power On/Off Cautions
c
Caution:
Do not turn off the printer:
❏ Until the Ready light comes on and is not flashing.
❏ While the Data (Ready light for AcuLaser M1200/EPL-6200L) light is flashing.
❏ While printing.
EPSON AcuLaser M1200 Series User’s Guide
Safety Instructions 15
To Next Page
Loading...
