4. Raise the output tray.
Note:
❏ Before printing, make sure that the Paper Size setting in your printer driver matches the paper
you load.
❏ If you want to print on paper heavier than 90 g/m (24 lb) or on special paper (such as envelopes,
labels, transparencies, or thick paper), see “Printing on Special Media” on page 25.
Loading a custom paper size
You can load any custom paper size into the MP tray as long as it is within 76.2 × 127.0 mm (3.0 ×
5.0 in.) and 216.0 × 355.6 mm (8.5 × 14.0 in.) in dimension.
The manual feed slot can accommodate any custom paper size from 76.2 ∞ 148.0 mm (3.0 ∞ 5.8
in.) to 216.0 × 355.6 mm (8.5 × 14.0 in.).
Note:
When you print on a custom paper size, make sure to select Thick Wide or Thick[W], Thick Narrow
or Thick[N], or Transparency for the Paper Type setting in the printer driver.
Printing on Special Media
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at
any time, Epson cannot guarantee the quality of any type of paper. Always test samples of paper
stock before purchasing large quantities or printing large jobs.
EPSON AcuLaser M1200 Series User’s Guide
Paper Handling 25
To Next Page
Loading...
Need help?
General
