Epson Aculaser M1200 series User Manual

Laser safety labels
w
Warning:
The performance of procedures and adjustments other than those specified in this guide may
result in hazardous radiation exposure.
Your printer is a Class 1 laser product as defined in the IEC 60825-1:2001 specifications.
The label shown on the right is attached to the back of the printer in countries where required.
Internal laser radiation
Max. Average Radiation Power 36.903 µW at laser aperture of the print head unit
Wavelength 770 to 800 nm
This is a Class III b Laser Diode Assembly that has an invisible laser beam. The printer head unit is
NOT A SERVICE ITEM, Therefore, the printer head unit should not be opened under any
circumstances.
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is produced
only when the printer is printing.
Ozone exposure limit
The recommended exposure limit for ozone is 0.1 parts per million (ppm), expressed as an average
time-weighted concentration over an 8-hour period.
The EPSON AcuLaser M1200/EPL-6200/EPL-6200L laser printer generates less than 0.1 ppm for 8
hours of continuous printing.
EPSON AcuLaser M1200 Series User’s Guide
Safety Instructions 14

Epson Aculaser M1200 series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 20 ppm (A4)
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0
Monthly Duty Cycle	Up to 10, 000 pages
Paper Size	A4, A5, B5, Letter, Legal, Executive
Supported Operating Systems	Windows 2000, Windows XP, Windows Vista, Windows 7, Mac OS X
Paper Capacity	150 sheets