Chapter 8
Troubleshooting
Ready and Error Lights (AcuLaser M1200/EPL-6200L)
The Ready and Error lights on the top of the printer may be the first indication of trouble. The
status of the lights, on, off or flashing, indicates your printer status, as described below. The Status
Alert window in the EPSON Status Monitor 3 utility indicates what type of error has occurred and
offers you a possible solution. Look through this section to find the kind of problem you have,
then try the recommended solutions in the order they are presented until your problem is solved.
Indicator lights
b
a
a. Error light
b. Ready light
The status of the lights are illustrated below.
on:
, flashing: , flashing slowly:
Status/Error/Warning INDICATOR LIGHTS
Ready Error
“Service Required (controller error)” on page 90 OFF
“Service Required (engine error)” on page 90
“Service Required (protocol error)” on page 90
“Output Paper Jam” on page 91
“Paper Jam” on page 91
EPSON AcuLaser M1200 Series User’s Guide
Troubleshooting 88
To Next Page
Loading...
