Epson Aculaser M1200 series - Changing the Printer Settings; For Mac os X 10.5 Users; For Mac os X 10.4 or below Users; Setting up the USB Connection

Changing the Printer Settings
You can change the settings on the printer, such as paper source, paper type, and paper quality
using EPSONRemotePanel.
For Mac OS X 10.5 users
1. Open System Preferences, and click the Print & Fax icon.
2. Select your printer from the Printers list, and click Open Print Queue.
3. Press and hold the Option key, and click the Utility icon.
4. Select your printer in the EPSONRemotePanel dialog box.
5. Click Setting, and then click Configuration.
For Mac OS X 10.4 or below users
1. Open the Print dialog box.
2. Select Printer Settings, and click the Utility tab.
3. Click EPSON Remote Control Panel icon.
4. Select your printer in the EPSONRemotePanel dialog box.
5. Click Setting, and then click Configuration.
Setting Up the USB Connection
Note:
If you are connecting the USB cable to your Macintosh through a USB hub, be sure to connect using
the first hub in the chain. The USB interface may be unstable depending on the hub used. If you
experience problems with this type of setup, connect the USB cable directly to your computer’s USB
connector.
EPSON AcuLaser M1200 Series User’s Guide
Using the Printer Driver For Macintosh 56