❏ Connect your printer to an electrical outlet that meets the power requirements of this printer.
Your printer’s power requirements are indicated on a label attached to the printer. If you are
not sure of the power supply specifications in your area, contact your local power company or
consult your dealer.
❏ If you are unable to insert the AC plug into the electrical outlet, contact an electrician.
❏ If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are
fuses in the plug, make sure you replace them with fuses of the correct size and rating.
❏ Use a grounded outlet that matches the printer’s power plug. Do not use an adapter plug.
❏ Make sure that there is no dust on the socket.
❏ Be sure to insert the plug completely into the electrical outlet.
❏ Do not handle the plug with wet hands.
❏ Avoid using outlets that other appliances are plugged into.
❏ Use the type of power source indicated on the label. If you are not sure of the type of power
available, consult your dealer or local power company.
❏ If you are unable to insert the plug into the outlet, contact a qualified electrician.
❏ Adjust only those controls that are covered by the operating instructions, as improper
adjustment of other controls may result in damage and may require repairs by a qualified
service representative.
❏ If you use an extension cord, make sure that the total of the ampere ratings on the products
plugged into the extension cord does not exceed the extension cord ampere rating.
❏ When connecting this product to a computer or other device with a cable, ensure the correct
orientation of the connectors. Each connector has only one correct orientation. Inserting a
connector in the wrong orientation may damage both devices connected by the cable.
❏ Never push objects of any kind through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
❏ Do not sit or lean on the printer. Do not put heavy objects on the printer.
❏ Do not use any kind of combustible gases in or around the printer.
❏ Never spill liquid of any kind on the printer.
❏ Except as specifically explained in this guide, do not attempt to service this product yourself.
Opening or removing covers that are marked Do Not Remove may expose you to dangerous
voltage points or other risks. Refer all servicing in those compartments to service personnel.
EPSON AcuLaser M1200 Series User’s Guide
Safety Instructions 12
To Next Page
Loading...
Need help?
General
