Epson Aculaser M1200 series - Page 125

❏ The numeral “0”
Print Sample
EPSON UPC-E
EPSON Code39
❏ Four Code39 fonts are available, allowing you to enable and disable the automatic insertion of
check digits and OCR-B.
❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in
conformance to the Code39 standard. For this reason, it is important to keep at least one space
between the bar code and the surrounding text to prevent overlapping.
❏ Spaces in Code39 bar codes should be input as “_” underbars.
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or select a
font other than a BarCode Font and input a space. If a space is input while a Code39 font is
selected, the bar code will not be correct.
Character type Alphanumeric characters (A to Z, 0 to 9) Symbols (- . space $ / + %)
Number of characters No limit
Font size When OCR-B is not used: 26 pt or more (up to 96 pt in Windows Vista,
XP, and 2000). Recommended sizes are 26 pt, 52 pt, 78 pt and 104 pt.
When OCR-B is used: 36 pt or more (up to 96 pt in Windows Vista, XP,
and 2000). Recommended sizes are 36 pt, 72 pt, 108 pt and 144 pt.
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
❏ Check digit
❏ Start/Stop character
EPSON AcuLaser M1200 Series User’s Guide
Working with Fonts 125