❏ Check digit
❏ Change code set character
Print Sample
EPSON Code128
EPSON ITF
❏ The EPSON ITF fonts conform to the USS Interleaved 2-of-5 standard (American).
❏ Four EPSON ITF fonts are available, allowing you to enable and disable the automatic
insertion of check digits and OCR-B.
❏ The height of the bar code is automatically adjusted to 15% or more of its total length, in
conformance to the Interleaved 2-of-5 standard. For this reason, it is important to keep at least
one space between the bar code and the surrounding text to prevent overlapping.
❏ Interleaved 2 of 5 treats every two characters as one set. When there are an odd number of
characters, EPSON ITF fonts automatically add a zero to the beginning of the character string.
Character type Numbers (0 to 9)
Number of characters No limit
Font size When OCR-B is not used: 26 pt or more (up to 96 pt in Windows Vista,
XP, and 2000). Recommended sizes are 26 pt, 52 pt, 78 pt and 104 pt.
When OCR-B is used: 36 pt or more (up to 96 pt in Windows Vista, XP,
and 2000). Recommended sizes are 36 pt, 72 pt, 108 pt and 144 pt.
The following codes are inserted automatically and need not be input by hand:
❏ Left/Right quiet zone
❏ Start/Stop character
❏ Check digit
❏ The numeral “0” (added to the beginning of character strings as needed)
EPSON AcuLaser M1200 Series User’s Guide
Working with Fonts 127
To Next Page
Loading...
