Epson Aculaser M1200 series - Page 51

Making a new watermark (AcuLaser M1200 only)
For Mac OS X 10.5 users
1. Open the print dialog box.
2. Select Printer Settings from the drop-down list and click the Stamp Function button.
3. Select the Watermark Settings tab, then select the Watermark check box.
4. Select Text or Image, then click .
5. If you select Text, type the watermark text, then select Font and Style. If you select Image,
select an image file (PDF, PNG, or JPG), then click Open.
Note:
❏ To edit the watermark name, double-click the watermark in the List box, then type the
watermark name.
❏ To remove the created watermark, select it from the List box, and click
. Then, click OK.
6. Select a custom water mark that has been saved from the Watermark drop-down list.
Note:
You can register up to 32 custom watermarks.
EPSON AcuLaser M1200 Series User’s Guide
Using the Printer Driver For Macintosh 51