Epson AM-C6000 Series - Page 49

3. Enter the User Name and Password.
Note:
e user name and password set here are used for driver and soware authentication.
4. Enable the functions that you want to allow in Select the check box to enable or disable each function..
5. Click Apply.
6. Register the user name and password set in step 3 on the computer using Epson Scan 2 or PC-FAX.
Related Information
& “Scanning from the Computer” on page 49
& “Sending and Receiving Faxes Using PC-FAX” on page 50
Scanning from the Computer
If you want to scan from the computer, set information for access limitations in Epson Scan 2.
1. Run Epson Scan 2.
2. Select Settings from Scanner.
Setup & Administration Guide
Information Registration and System Conguration
49