Epson AM-C6000 Series - Page 52

Allow registered users to log in to Web Cong (Web Cong)
1. Select Access Control Settings > Basic from Epson Print Admin Serverless Setting List.
Or access the Product Security tab > Access Control Settings > Basic.
2.
Select Allow registered users to log in to Web Cong.
3. Click OK.
Making the Function Settings for Use Without Authentication (Web Cong)
When users log out, permit guest users to use the printer's standalone functions (copy, fax, scan, etc.). e icons for
the available functions are displayed on the login screen.
Note:
Fax is only displayed on printers equipped with the fax function.
1.
Select the Epson Print Admin Serverless Setting List > Access Control Settings > Basic.
Or access Product Security tab > Access Control Settings > Basic.
2.
Conrm
that the Enables Access Control is selected.
3. Enable the functions that you want to permit to use without authentication in Select the check box to allow
using from the printer's control panel when not logged in..
4. Click OK.
Related Information
& “Making the Function Settings for Use Without Authentication (Conguration Template)” on page 85
Making Authentication Device Settings (Web
Cong
)
Set the reading format for authentication information received from an ID card.
1. Select the Epson Print Admin Serverless Setting List > Card Reader.
Or access Device Management tab > Card Reader.
2. Set the reading information of the authentication device and ID card.
See the related information for the details of each item.
3. Click Next.
e setting conrmation screen is displayed.
4. Click OK.
Related Information
& “Available Reading Method for Authentication Information” on page 22
Setup & Administration Guide
Information Registration and System Conguration
52