Epson AM-C6000 Series - Page 53

Mail Server Settings (Web Cong)
Set when you use the following functions to allow printers to send email.
O Scan to My Email
is is the function to send the scanned data to the email address of the user who logged in to the printer. For
the mail and scan setting, you can set from Scan/Copy > User Default Settings > Scan to Email.
O Email Notication
is is the function to receive alerts by email when events occur, such as your printer running out of paper.
See the manual for details on the settings.
Related Information
&
“Registration for the User Information (Web
Cong
)” on page 35
&
“About Email
Notications
” on page 107
Making Scan to My Folder Settings (Web Cong)
Set the Scan to My Folder function by using Epson Print Admin Serverless. You can set the following save
destinations using the Scan to My Folder function.
Set Destination Target Authentication Method
(Remote DB)
Destination Path
User folder Each user (device authenti-
cation user)
Local DB, Local DB and Re-
mote DB (Microsoft Entra ID
authentication, LDAP)
Contacts
User folder Each user (LDAP authentica-
tion user)
Remote DB (LDAP), Local DB
and Remote DB (LDAP)
LDAP attribute
Shared folder
*
All users Local DB, Remote DB (Mi-
crosoft Entra ID authentica-
tion, LDAP), Local DB and
Remote DB (Microsoft Entra
ID authentication, LDAP)
Device (setting for the Scan
to My Folder function)
* : A folder named after the user's ID is automatically created immediately below the specied folder path or URL
1. Select the Epson Print Admin Serverless Setting List > Epson Print Admin Serverless > Scan to Network
Folder/FTP.
Or access Epson Open Platform tab > Epson Print Admin Serverless > Scan to Network Folder/FTP.
2. Set each item.
3.
Click OK.
Setup & Administration Guide
Information Registration and System Conguration
53