You ca n s et t hi s f ro m Epson Print Admin Serverless > Scan to Network Folder/FTP from Epson Print Admin
Serverless Setting List or the Epson Open Platform tab > Epson Print Admin Serverless > Scan to Network
Folder/FTP.
Item Explanation
Prohibit manual entry of destination When enabled, the user cannot change the default destination.
Editing the Home Screen (Web
Cong
)
You can display only necessary icons by editing the icon layout displayed on the home screen for the control panel.
1. Select Epson Print Admin Serverless > Customize One-touch Functions from Epson Print Admin
Serverless Setting List.
Or access the Epson Open Platform tab > Epson Print Admin Serverless > Customize One-touch
Functions.
2. Select Enable from Customize One-touch Functions.
3.
Select the layout of the icons displayed on the control panel from Maximum functions per screen.
e
image
changes according to the selected layout.
c
Important:
In the following cases, icons for the specied functions are not displayed on the home screen.
O When you select functions that are not permitted due to user restrictions.
O When the email address for a logged in user is not registered. (Scan to My Email)
O When the destination folder is not set. (Scan to My Folder)
4. Select the screen number from Screen(s).
5. Select the function you want to display on the line with the same number as the number at the position where
you want to display the icon.
6. Click OK.
Related Information
& “Editing the Home Screen
(Conguration
Template)” on page 86
Making Pull Printing Settings (Web Cong)
You can make settings to print from any printer by linking to the printer using Epson Print Admin Serverless.
You can register up to four slave printers for a master printer that sends print data from the user's computer. You
cannot register additional slave printers from the slave printer.
Setup & Administration Guide
Information Registration and System Conguration
55
To Next Page
Loading...
