Epson AM-C6000 Series - Page 56

c
Important:
e
following environment is necessary for linked printers.
O Epson Print Admin Serverless is available.
O Pull Printing is supported.
O Epson Print Admin Serverless settings are set to the same values.
O When using an additional network interface board, it only receives print jobs on an additional network
interface.
You can print the received print jobs from the printer registered as the slave printer.
When printing by linking to a dierent model of printer, printing may not be possible depending on the print
settings.
Related Information
& “Printing is not possible because the print job cannot be selected on the printer linked with pull printing.” on
page 114
Linking the Printer (Web
Cong
)
1. Select Epson Print Admin Serverless Setting List > Epson Print Admin Serverless > Pull Printing.
Or access the Epson Open Platform tab > Epson Print Admin Serverless > Pull Printing.
2. Set the linked printer from 1: to 5:.
Note:
Be sure to include the printer that is currently set.
You can use the IPv4, IPv6, or FQDN format for conguration. You can use the following format for FQDN
(<host name>. <domain name> format).
O Host name: You can enter 2 to 63 bytes in US-ASCII numbers, letters, and hyphens (except leading and
trailing).
O Domain name: You can enter 2 to 249 bytes in US-ASCII numbers, letters, and hyphens (except at the start
and end of the string). Periods can be used as a delimiter, but you cannot enter more than one period
consecutively. Also, use periods to separate the strings so that each string is 63 bytes or less.
3. Click OK.
e connection check starts. If the connection is successful, a connection conrmation page will be displayed.
Making Page Count Management Settings (Web Cong)
You can make a variety of settings for page count management.
You can set page count management for users with Device Authentication (Local DB).
When you select Remote DB as the Authentication Method, Manage page count is not displayed in the list.
Note:
You can change the page count management settings for each user on the Epson Open Platform tab > User Settings.
Setup & Administration Guide
Information Registration and System Conguration
56