Epson AM-C6000 Series - Page 84

2. Select the ID of an unregistered line except for 01.
Note:
01 is reserved for applications such as the authentication system.
3. Enter the User Name and Password.
Note:
e user name and password set here are used for driver and soware authentication.
4.
Select Allowed for the functions that you want to allow the driver and
soware
to access.
5. Click OK.
Register the user name and password set in step 3 on the computer using Epson Scan 2 or PC-FAX.
Related Information
& “Scanning from the Computer” on page 49
& “Sending and Receiving Faxes Using PC-FAX” on page 50
Setup & Administration Guide
Information Registration and System Conguration
84