WSD
You can save the scanned image to a computer connected to the scanner, using WSD feature.
Device Information
Status
is menu is only available when the icon is displayed on the home screen.
Indicates the following status. Press the OK button to see more detailed information.
❏ Roller Replacement Soon: e number of scans is close to the life cycle of the rollers. Prepare
replacement rollers.
“Roller Assembly Kit Codes” on page 26
❏ Roller Replacement: e number of scans exceeds the life cycle of the rollers. Replace the rollers.
“Replacing the Roller Assembly Kit” on page 177
❏ Glass Cleaning: Dirt has been detected on the glass surface inside the scanner. Clean the inside of
the scanner. You can continue scanning by pressing the
y button.
“Cleaning Inside the Scanner” on page 172
❏ Regular Cleaning: It is time to clean inside the scanner.
“Cleaning Inside the Scanner” on page 172
Serial Number
Displays the serial number of the scanner.
Current Version
Displays the current
rmware
version.
Total Number of Scans
Displays the total number of scans.
Number of 1-Sided Scans
Displays the number of single-sided scans.
Number of 2-Sided Scans
Displays the number of double-sided scans.
Number of Scans of Carrier Sheet
Displays the number of scans using a Carrier Sheet.
Number of Scans After Replacing Roller
Displays the number of scans
aer
replacing the roller assembly kit.
Press the OK button to reset the number aer replacing the roller assembly kit.
Menu Options on the Control Panel
>
Device Information
165
To Next Page
Loading...
Need help?
General