Epson B11B259201 User Manual

Conguring a Certicate for IPsec/IP Filtering
Congure the Client Certicate for IPsec/IP Filtering. When you set it, you can use the certicate as an
authentication method for IPsec/IP Filtering. If you want to
congure
the
certication
authority, go to CA
Certicate.
1.
Access Web Cong and then select the Network Security tab > IPsec/IP Filtering > Client Certicate.
2.
Import the certicate in Client Certicate.
If you have already imported a certicate published by a Certication Authority, you can copy the certicate
and use it in IPsec/IP Filtering. To copy, select the certicate from Copy From, and then click Copy.
Related Information
& “Running Web Cong on a Web Browser” on page 23
& “Conguring a CA-signed Certicate” on page 225
& “
Conguring
a CA
Certicate
” on page 229
Connecting the Scanner to an IEEE802.1X Network
Conguring an IEEE802.1X Network
When you set IEEE802.1X to the scanner, you can use it on the network connected to a RADIUS server, a LAN
switch with authentication function, or an access point.
1.
Access Web
Cong
and then select the Network Security tab > IEEE802.1X > Basic.
2.
Enter a value for each item.
3.
Click Next.
A conrmation message is displayed.
4.
Click OK.
e scanner is updated.
Related Information
& “Running Web Cong on a Web Browser” on page 23
IEEE802.1X Network Setting Items
Items Settings and Explanation
IEEE802.1X (Wired LAN)
You can enable or disable settings of the page (IEEE802.1X > Basic) for IEEE802.1X (Wired
LAN).
Administrator Information > Advanced Security Settings > Connecting the Scanner to an IEEE802.1X Network
241

Epson B11B259201 Specifications

General

Brand	Epson
Model	B11B259201
Category	Scanner
Language	English