206
Calibrating for Finger Touch Interactivity
Finger touch calibration coordinates the positioning of your finger with the location of the cursor.
Note: You can purchase a touch unit as an optional accessory or use a touch unit from an older
BrightLink projector.
Note: Make sure you have calibrated the pens, installed the Touch Unit, performed angle adjustment,
and turned the Touch Unit on before calibrating for finger touch interactivity. See the online Installation
Guide for Touch Unit installation information.
1. Press the Menu button, select the Installation menu, and press Enter.
2. Select Touch Unit and press Enter.
3. Select Touch Calibration and press Enter.
To Next Page
Loading...
