143
2. To lower or raise the volume, press the Volume buttons on the remote control.
A volume gauge appears on the screen.
3. To set the volume to a specific level for an input source, use the projector menus.
Parent topic: Using Basic Projector Features
Selecting a Quick Startup Setting
If you want to quickly restart the projector within five seconds after turning it off, you can change the
Quick Startup setting. You can select 20, 60, or 90 minutes of Quick Startup time.
Note: The projector may take longer than five seconds to start up in the following conditions:
• When projecting from the one of the projector's USB ports
• When projecting with Screen Mirroring
• If whiteboard sharing was terminated in the previous session
• If you want to restore the whiteboard contents from the previous session
1. Turn on the projector.
2. Press the Menu button.
To Next Page
Loading...
