EasyManua.ls Logo

Epson BrightLink EB-725Wi - Solutions When the Projected Screen Is Not Shared Correctly; Solving Interactive Problems

Epson BrightLink EB-725Wi
359 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
323
Parent topic: Solving Network Problems
Solutions When the Projected Screen is not Shared Correctly
If the Screen Sharing feature does not deliver the screen to a receiving projector properly, try the
following solutions:
Connect the projector to the same network as the projector that is sharing its screen.
Make sure the receiving projector supports the Screen Sharing function.
Make sure the Screen Sharing setting in the Network menu is set to On for all projectors.
Close any running Epson iProjection (Windows/Mac) software.
Make sure the image being projected is not protected by copyright.
Make sure Sharing is displayed on the status bar that appears in the upper center part of the screen.
If it is not displayed, try reconnecting.
Parent topic: Solving Network Problems
Related concepts
Screen Sharing
Related references
Network Settings - Network Menu
Solving Interactive Problems
Check the solutions in these sections if you have problems using the interactive system.
Note: If the "Error occurred in the Easy Interactive Function" message appears, contact Epson for help.
Solutions When the Interactive Pens Do Not Work
Solutions When the Interactive Pen Position Is Not Accurate
Solutions When the Interactive Pens Are Slow or Difficult to Use
Solutions When the Interactive Pens Cause Interference or Unwanted Effects
Solutions When Finger Touch Interactivity Does Not Work
Solutions When You Cannot Operate a Computer from the Projected Screen
Solutions for Problems With Capturing, Printing, Saving, or Scanning
Solutions for Problems with Whiteboard Mode
Parent topic: Solving Problems

Table of Contents

Related product manuals