Epson BrightLink EB-725Wi - Controlling Computer Features from a Projected Screen (PC Interactive Mode)

190
Parent topic: Interactive Modes
Controlling Computer Features from a Projected Screen (PC Interactive Mode)
You can navigate, select, and interact with your computer programs from the projected screen using the
interactive pens or your finger just as you would a mouse.
Note: A Touch Unit is optional and must be installed for finger touch operation. Mac users need to install
the Easy Interactive Driver before using PC Interactive mode. Go to epson.com/support (U.S.),
epson.ca/support (Canada), or latin.epson.com/support (Caribbean) and select your projector.
1. Connect your computer to any available video input port on the projector other than a USB port.
2. Connect your computer to the projector's USB-B1 port for interactivity.
3. Turn on your projector and computer to project your computer screen.
4. Press the Menu button on the remote control, select the Pen/Touch menu, and press the Enter
button.
5. Select the PC Interactivity setting and press the Enter button.