254
Setting Options Description
Source Signal Format
Mic Input Level
Overscan
EDID
Reset to Defaults
Displays settings selected for the current
input source
Signal Format: sets the signal type and
video range for certain input sources
• Video Signal: specifies the signal type
from input sources connected to video
ports; if interference appears or no
image appears when set to Auto,
select the appropriate signal type
• Video Range: sets the video range to
match the setting of an input source
connected to the HDMI ports
Mic Input Level: adjusts the volume from
a microphone when audio is not output to
an audio/visual system; when the Mic
Input Level setting is turned up, the
volume of the other connected device is
turned down, and when the Mic Input
Level is turned down, the volume of the
other connected device is turned up
Overscan: changes the projected image
ratio to make the edges visible by a
selectable percentage or automatically
when projecting a component signal
EDID: describes the display capabilities
of your projector when the selected input
source is HDMI; change this setting as
necessary according to the resolution of
the current input source (BrightLink
735Fi)
Reset to Defaults: resets all settings for
the current input source
To Next Page
Loading...
