!
Caution:
❏ Never feed labels backward using the Load/Eject or Tear Off/Bin button. When fed
backward, labels can easily peel off the backing sheet and cause a paper jam.
❏ Use them only under normal operating conditions described below:
Temperature: 15 to 25 ˚C (59 to 77 ˚F)
Humidity: 30 to 60% RH
❏ Do not leave labels loaded in the printer between jobs; they may curl around the platen and
jam when you resume printing.
❏ Do not load continuous paper with labels from the rear paper slot. Because the paper path from
the rear slot is curved, labels may come off their backing sheets inside the printer and cause a
paper jam.
❏ Do not load paper that is curled or has been folded.
Tear off and eject labels
When using continuous forms, always tear off and eject labels as described below.
1. Tear off the last label form that has entered the printer.
* perforation nearest the paper entry slot
2. Press the LF/FF button to eject the remaining labels from the printer.
!
Caution:
Never feed labels backward using the Load/Eject or Tear Off/Bin button. When fed backward,
labels can easily come off the backing sheet and cause a paper jam.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User’s Guide
Paper Handling 51
To Next Page
Loading...
Need help?
General