Maintenance
61
Cleaning the Print Head
If the nozzles are clogged, faint colors, banding, or unintended colors appear on printouts. When such print
quality problems occur, print nozzle check patterns and check for nozzle clogging.
(U"Printing Nozzle Check Patterns" on page 26)
If nozzles are clogged, run a print head cleaning. To run a print head cleaning, select the menu as described
below.
Run [Power Cleaning] only when nozzle clog is not cleared by running [Print Head Cleaning].
Q NOTE
The [Power Cleaning] consumes ink more than [Print Head Cleaning].
To Next Page
Loading...
Need help?
General
