EasyManuals Logo

Epson DFX-9000 User Manual

Epson DFX-9000
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Loading Paper 9
English
Chapter 2
Loading Paper
Using the Two-Tractor System
Your printer can load paper from a front tractor and a rear tractor. Be sure to
leave enough room around the printer for the two stacks of fresh paper and for
the printed stack. Align your paper supply so the paper feeds smoothly into the
printer.
Place the paper supply lower than the printer to avoid a paper jam. Make sure
that your stack of printed pages does not interfere with the rear tractor’s paper
supply.
Supported Paper Types and Sizes
You can use the following types of continuous paper with either tractor:
Single-sheet
Multi-part
Labels
Continuous forms with labels
Overlapping multi-part forms
You can print on continuous paper from 3 inches (76.2 mm) to 16.5 inches
(419.1 mm) wide. Your printer senses the paper width automatically.
The printer automatically adjusts to the thickness of the paper loaded when the
platen gap setting is set to
Auto in SelecType mode. See “Using SelecType
Mode” on page 18 for details.
Note:
Make sure your paper matches the specifications described in the on-screen
Reference Guide.
When the optional perforation cutter (part number C81507X) is installed, the
printable width is from 4 inches (101.6 mm) to 16 inches (406.4 mm).
Loading Paper On the Front Tractor
1. Lift up the front cover until it locks in place.
2. Release the right and left sprockets by pulling the lock levers down.
front tractor both tractorsrear tractor
sprocket lock lever
http://www.ochimp.com
http://www.ochimp.com
For More Info
Click Here ===>

Other manuals for Epson DFX-9000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson DFX-9000 and is the answer not in the manual?

Epson DFX-9000 Specifications

General IconGeneral
ColorNo
Built-in barcodesCode 39, POSTNET, UPC-A, UPC-E
Maximum resolution240 x 144 DPI
Maximum print sizeA4 (210 x 297 mm)
Standard interfacesSerial
Dimensions (WxDxH)700 x 378 x 363 mm
Power requirements100-240V, 50-60Hz
Connectivity technologyWired
Compatible operating systemsMicrosoft Windows 95 / 98 / 2000 / Me / XP/ Windows NT 4.0
Sound pressure level (printing)58 dB
Mean time between failures (MTBF)20000 h
Sustainability certificatesENERGY STAR
Power consumption (standby)1.85 W
Power consumption (typical)7.5 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)10 - 80 %

Related product manuals