80
4
Enter the information for each item, and click [Save].
• User name: Enter the user name to use for identity authentication in EPSON Total Disc
Maker/EPSON Total Disc Monitor/EPSON Total Disc Net Administrator.
• Password: Enter the password to use for identity authentication in EPSON Total Disc
Maker/EPSON Total Disc Monitor/EPSON Total Disc Net Administrator.
• Confirm password: Enter the password again for confirmation.
• User number: Enter the user number to use for performing identity authentication with the
authentication keypad.
• PIN: Enter the PIN to use for performing identity authentication with the
authentication keypad.
• PIN confirmation: Enter the PIN again for confirmation.
• Be sufficiently careful not to set the wrong authority.
∗ To add an administrator, select the [Administrator] check box.
∗ To add an approver (Security Mode only), select the [Approver] check box.
• Enter 5 to 16 alphanumeric characters for the user name.
• Enter 5 to 16 alphanumeric characters or symbols (“.”, “ -”, “_”) for the password.
• The password is case-sensitive.
• Do not set a date of birth, employee number, or anything else that is easy to guess for
the password or PIN.
• Enter 5 to 16 numbers for the user number and PIN.
• Manage the password and PIN so that they cannot be used by anyone other than the
user.
• The period of validity for the password and PIN is 180 days. Change them regularly
before the period of validity ends. (See “Changing password and PIN” on page 89 in
this guide for the procedure to change the password and PIN.)
• You can register the information for up to 100 users.
To Next Page
Loading...
Need help?
General